AeroMax Lowering Springs and Koni Cup Kit for Model 3: FAQ
By Tesla Accessories | Published: 2026-11-03
Category: Avaliações de Produtos
Get clear answers on AeroMax lowering springs and the Koni Special Active Cup Kit for Model 3 Dual Motor: fitment, 1.5-inch drop, ride feel, and installation checks.
Quick answer
The EVANNEX AeroMax Lowering Springs with Koni Special Active Cup Kit is a fixed 1.5-inch drop package for the Tesla Model 3 Dual Motor AWD. It pairs US-made springs with Koni Special Active shocks and struts, so you get a lower stance and a sportier feel without coilover height adjustment.
What the kit changes, and what it does not
This is a spring-and-damper kit, not a coilover system. Ride height is set by the AeroMax springs at a fixed 1.5-inch drop from stock, so there is no perch or collar to adjust later. That simplifies installation and alignment, but it also means you cannot fine-tune the stance for different wheel and tire setups.
The Koni Special Active shocks and struts are included to control the lower ride height. Because the catalog does not list spring rates, damper valving, or alignment specifications, treat those as unknowns until you confirm with the installer. If you need adjustable height or track-specific valving, this kit is not the right tool.
Fitment is limited to Dual Motor AWD
The catalog lists fitment for Tesla Model 3 Dual Motor AWD only. It does not list Rear-Wheel Drive or Performance trim compatibility, so do not assume the kit carries over. Check your trim and model year with the seller before ordering, especially if your car has factory suspension differences or aftermarket parts already installed.
The honest trade-off: stance and simplicity versus adjustability
A fixed-drop spring kit is usually less expensive and simpler to install than coilovers, and the included Koni dampers are matched to the lower springs. The trade-off is that you give up height adjustment and the ability to change spring rates. If you mainly drive on maintained roads and want a modest drop with a more sporting feel, that trade-off is reasonable. If you regularly deal with steep driveways, heavy cargo, or want to tune the setup, plan for a different solution.
AeroMax and Koni Cup Kit questions, answered
- Will this kit fit my Model 3?
- The catalog lists fitment for Tesla Model 3 Dual Motor AWD only. It does not list RWD or Performance fitment, so confirm your trim and model year with the seller before ordering. Check your trim badge or VIN before purchase; do not assume all Model 3 variants share the same suspension.
- How much does it lower the car?
- The AeroMax springs provide a 1.5-inch drop from stock ride height. That number is fixed by the springs, not adjustable. Measure your current fender-to-ground height and compare with the 1.5-inch drop to judge clearance at your usual driveways.
- Do I need to adjust the height after installation?
- No. This is not a coilover kit, so there is no height adjustment. The springs set the ride height, and the included Koni Special Active shocks and struts are matched to that drop. If you want to change ride height later, you will need different hardware.
- What is included in the kit?
- The kit includes AeroMax lowering springs and Koni Special Active shocks and struts. The catalog does not list additional hardware such as mounts, bump stops, or alignment components, so check the product page or ask the seller what else is in the box. Confirm whether you need to reuse factory mounts and hardware before booking installation.
- How does the ride feel compared with stock?
- The catalog describes the kit as transforming the car into a more nimble, sporting version of its stock self. It does not provide specific ride-comfort or handling test data, so expect a firmer feel from the lower springs and matched dampers rather than a luxury-soft ride. If comfort over rough roads is your top priority, a fixed-drop sport kit may not be the best choice.
- Is this a coilover kit?
- No. It is a spring-and-damper kit with a fixed drop. Coilovers allow height and sometimes damping adjustment; this kit does not. Choose this kit for simplicity and a set stance, not for adjustable height.
- What should I plan for after installation?
- Any change in ride height affects suspension geometry, so plan for a professional alignment after the springs settle. The catalog does not supply alignment specifications, so use a qualified Tesla-experienced shop. Budget for an alignment and a post-installation inspection as part of the total cost.
Product facts
- EVANNEX AeroMax Lowering Springs with Koni Special Active Cup Kit for Tesla Model 3 Dual Motor: The kit fits Tesla Model 3 Dual Motor AWD and lowers ride height by 1.5 inches from stock. That fixed drop gives a noticeably lower stance without the need to set or adjust coilover height.
EVANNEX AeroMax Lowering Springs with Koni Special Active Cup Kit for Tesla Model 3 Dual Motor - EVANNEX AeroMax Lowering Springs with Koni Special Active Cup Kit for Tesla Model 3 Dual Motor: The package combines AeroMax springs with Koni Special Active shocks and struts and is designed and manufactured in the USA. Including matched dampers means you are not pairing lowering springs with worn or mismatched stock shocks.
