3D MAXpider KAGU Floor Mats for Chevy Bolt EV/EUV: Fit Guide

By Tesla Accessories | Published: 2026-11-03

Category: Product Reviews

A step-by-step fit and installation guide for 3D MAXpider KAGU first-row floor mats in the Chevy Bolt EV and EUV, with cleaning and fit checkpoints.

Quick answer

For a Chevy Bolt EV (2017–2023) or Bolt EUV (2022–2023), the 3D MAXpider KAGU first-row floor mat set is a direct-fit all-weather option that installs without tools. Follow the steps below to check fit, seat the mats, and keep them clean.

Why the KAGU mat is a practical choice for Bolt owners

The KAGU mat uses a multi-layer construction with raised edges to contain water, snow, and daily debris. That matters in a compact EV like the Bolt, where the floor area is small and a spilled drink or slushy boots can quickly reach the carpet.

The mat is waterproof and easy to clean, and 3D MAXpider describes the material as eco-friendly and odorless. For EV owners who care about cabin air quality, that odorless claim is worth noting, though you should still air the mats briefly after unboxing.

Fitment limits to check before you order

This mat set fits Chevrolet Bolt EV models from 2017 through 2023 and Bolt EUV models from 2022 through 2023. It is not compatible with right-hand-drive vehicles, so confirm your Bolt is left-hand drive before buying.

If your Bolt falls outside those model years, or if you drive a right-hand-drive version, this specific mat is not the right choice. The catalog does not list separate part numbers for other configurations, so check your owner's manual or measure your floor before ordering an alternative.

Step-by-step fit and installation

Confirm your Bolt's model year and drive side: Check the driver's side of your Bolt: the steering wheel should be on the left. Then confirm your model year is within 2017–2023 for Bolt EV or 2022–2023 for Bolt EUV. If your Bolt is right-hand drive or outside those years, stop here; this mat is not compatible.
Remove the old mats and vacuum the floor: Pull out any existing mats and vacuum loose dirt, sand, and debris from the carpet. A clean surface helps the new mat sit flat and prevents grit from scratching the carpet. Check for retained water or dampness under the old mats and dry the area before installing new mats.
Test-fit the mat before pressing it down: Lay the KAGU mat in the footwell without forcing it. The raised edges should align with the floor contours and the mat should not overlap the pedals or seat rails. If the mat bunches or blocks pedal travel, reposition it; never trim or modify the mat to force a fit.
Seat the mat and check pedal clearance: Press the mat down evenly from the center outward. Sit in the seat and press each pedal through its full travel to confirm the mat does not interfere. Pedal interference is a safety issue; remove the mat and recheck fitment if you feel any contact.
Clean the mat regularly to keep it performing: Shake out loose debris, then wipe or rinse the waterproof surface with mild soap and water. Avoid harsh solvents and let the mat dry fully before reinstalling. Clean the mats at every car wash or when you see salt or mud buildup; trapped grit can wear the surface over time.

Product facts

3D MAXpider Chevrolet Bolt EV/EUV KAGU First Row Floor Mat: Fits Chevrolet Bolt EV 2017–2023 and Bolt EUV 2022–2023, and is not compatible with right-hand-drive vehicles. Confirm your model year and drive side first; this mat is a direct fit only for those left-hand-drive Bolt applications.
3D MAXpider Chevrolet Bolt EV/EUV KAGU First Row Floor Mat
3D MAXpider Chevrolet Bolt EV/EUV KAGU First Row Floor Mat: Multi-layer construction with raised edges and waterproof, easy-to-clean materials. Raised edges help contain spills and slush, and the waterproof surface means you can rinse or wipe the mat instead of scrubbing carpet.