SeaSucker Monkey Bars Roof Mounted Rack Vacuum Cup System for EV Owners

• Vacuum-mount roof rack lets you mount accessories on a vehicle with a naked roof
• Great for use on rental cars when traveling
• 2 Round crossbars work with most clamp-on accessories
• Screw apart for compact storage in your trunk, garage, or suitcase when not in use
• Vacuum cups install to metal, glass, or fiberglass in seconds - simply pump plungers 
• Black aluminum crossbars resist corrosion
• Customizable crossbar spread lets you carry gear of various size
• Made in the USA.

Description

Monkey Bars are the perfect solution for adding a roof rack to your vehicle with a naked roof. Vacuum cups attach in seconds to the roof, trunk, or glass on your car, SUV, van, motorhome, or trailer. Because they don't require a permanent installation, the Monkey Bars are great for transporting gear when you're traveling by rental car. And if you're worried that vacuum cups won't stay attached to your vehicle, you can rest assured because each vacuum cup provides 210 lbs of suction, giving you a total of 1,260 lbs of pull strength. Your gear isn't going anywhere! Additionally, the rack stores easily in your trunk or garage when not in use, or in your suitcase while traveling.

Monkey Bars are compatible with most accessories that clamp around roof rack bars, including bike, ski, water sports, and cargo carriers. Vacuum cups allow you to put the front and rear crossbars anywhere, so you can customize the crossbar spread to fit your accessory. This also allows you use the crossbars to carry kayaks, lumber, and other longer items as well as cargo baskets, luggage, and other shorter items.

The bars screw apart in the middle. For compact storage, simply unscrew them and store them in your trunk, garage, or even in your suitcase if you're traveling or using a rental car.

Specifications

Specs:

Color: Black Aluminum

Weight capacity: 150 lbs

Pull strength: 1,260 lbs

Per cup: 210 lbs

Crossbar dimensions (each): 48" long x 1-1/4” diameter

Bar diameter: 1.3”/33mm

Total rack weight: 12 lbs

Bar diameter: 1.3”/33mm

The Monkey Bars are Black round aluminum cross bars. This allows you to easily attach accessories for activities such as kayaking, skiing, surfing and paddle boarding, biking, or hauling cargo. Powered by 6" SeaSucker vacuum mounts (4 up front and 2 in the rear), the Monkey Bars fit on just about any car with a roof. Have a wide or narrow roof? No worries, the vacuum mounts can be moved to any position on the bar to ensure a perfect fit for any vehicle.

Installation

Installation Video

Installation Guide

The SeaSucker Monkey Bars are quick and easy to mount. To install them, make sure the mounting surface is clean and place them on your roof, trunk, or window glass then press the pumps several times until the orange bands disappear. Depending on the surface they're mounted to and the load being put on them, suction in the cups will decrease over time. Make sure to check the plungers before you get into your vehicle. When you see the orange indicator bands show simply re-pump the plungers.   

To break the seal on each cup and remove the rack from your vehicle, simply pull the T-shaped tabs up and towards the center of the cups - it's that easy. Remove the body and vacuum cups and store them in your trunk or garage, or put them in a storage bag or suitcase to take with you.

DISCLAIMER:  *EVANNEX is not responsible for any damage to your vehicle during installation, use or removal.