Volver al blog
Reseñas de productos 2026-11-15 Tesla Accessories 2 vistas

EVANNEX Flush Wheel Spacer Kit for Model 3 Performance: Fit Guide

EVANNEX Flush Wheel Spacer Kit for Model 3 Performance: Fit Guide

See what the EVANNEX flush kit changes on a Model 3 Performance, which wheels it is recommended for, and the fitment and trade-off questions to settle before ordering.

The stance question this kit answers

If your Model 3 Performance sits with its stock wheels tucked inside the fender line, the EVANNEX Wheel Spacer Flush Kit is aimed squarely at that gap. It pushes the wheels outward so they sit closer to the fender lip, which is the visual change most owners are after when they search for a flush fit.

The kit is a set of four spacers plus extended hardware, not a universal spacer you trim to size. The supplied information gives you the key numbers and the recommended wheel pairing, so you can decide whether this is the right purchase before you commit.

What the EVANNEX kit actually includes

  • EVANNEX Wheel Spacer Flush Kit for Tesla Model 3 Performance: Pushes wheels out 20mm front and 20mm rear to fill the fender for a flush look. The front and rear spacing is matched, so the stance change is consistent across the car rather than staggered.
    EVANNEX Wheel Spacer Flush Kit for Tesla Model 3 Performance
    EVANNEX Wheel Spacer Flush Kit for Tesla Model 3 Performance
  • EVANNEX Wheel Spacer Flush Kit for Tesla Model 3 Performance: Sold as a set of four wheel spacers and 20 extended titanium wheel studs. You get hardware for all four corners in one purchase, which matters if you want a complete, matched install rather than sourcing studs separately.
  • EVANNEX Wheel Spacer Flush Kit for Tesla Model 3 Performance: Crafted from premium 6061-T6 aluminum, with machined slots on the back for effortless removal. The removal slots are a practical detail: spacers that seize to the hub can be a chore to take off later, and this design is intended to avoid that.

Which wheels and which Model 3 this kit is recommended for

EVANNEX recommends this kit for use with the factory 20" wheels, and it is recommended for the Model 3 Performance. The supplied information also states that it will fit the base model as well, so the Performance recommendation is about the intended pairing rather than a hard exclusion.

That distinction matters when you are choosing. If you run aftermarket wheels, the recommendation does not cover your setup, and the supplied information does not confirm clearance or stud length for those wheels. Treat the factory-wheel recommendation as the supported use case and verify anything else with the seller before ordering.

Why Tesla leaves the wheels tucked in

The supplied product information explains the gap as a production compromise. Concept cars often show wheels flush with the fender lip, and as a car moves toward production, the wheel position typically becomes more conservative.

One reason given is global compliance: many countries require clearance for snow chains, and automakers including Tesla build that clearance into new cars so a single design can serve multiple markets. That context helps you see the spacer as a cosmetic correction to a deliberate factory choice, not a fix for a defect.

Fitment checks to settle before you order

The supplied information covers the main recommendation but leaves some installation specifics open. Use these checks to decide whether the kit matches your car and your plans.

  • Confirm your trim: The kit is recommended for the Model 3 Performance and is stated to fit the base model as well. If you drive a different Model 3 variant, the supplied information does not confirm fitment.
  • Check your wheels against the recommendation: The kit is recommended with the factory 20" wheels. Aftermarket wheel fitment is not confirmed by the supplied information.
  • Plan for the extended studs: The kit includes 20 extended titanium studs, which are part of the supplied package. The supplied information does not include a torque specification or a step-by-step installation procedure, so those details need to come from a qualified installer or the manufacturer's documentation.
  • Decide whether the look is worth the change: The 20mm front and rear push is the whole point of the kit. If you like the current stance or want a more conservative change, this kit is more aggressive than you need.

What the supplied information does not settle

The kit listing does not include care instructions, a torque spec, an alignment recommendation, or a confirmed compatibility statement for wheels other than the factory 20" set. It also does not state a weight or a warranty term. Those gaps are not reasons to avoid the kit, but they are reasons to ask the seller or a qualified installer before you rely on an assumption.

One more practical note: the machined removal slots are described as eliminating the need for chiseling to detach the spacers from the hub. That is a design claim from the product information, not a guarantee about every install, so treat it as a feature to look for rather than a promise.

The honest trade-off

A flush stance comes from moving the wheels outward, and that is exactly what this kit does. The upside is the look the product is built for, with matched front and rear spacing and a complete hardware set. The trade-off is that you are changing a factory geometry choice that exists partly for clearance reasons, and the supplied information does not quantify the effect on clearance, handling, or tire wear.

If your goal is the flush look on a Model 3 Performance with factory wheels, the EVANNEX kit is a coherent, purpose-built option at its listed catalog price. If you need confirmed fitment for aftermarket wheels, a documented torque procedure, or a milder change, this is not the kit the supplied information supports.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil