Tesla Model 3 Highland Mud Flap Installation Guide
By Tesla Accessories | Published: 2026-10-20
Category: How-to Guides
Learn how to install mud flaps on your Tesla Model 3 Highland with our no-drill, step-by-step guide. Protect your paint from road debris and weather.
Quick answer
Install mud flaps on your Tesla Model 3 Highland in about 20 minutes using a no-drill set that clips into existing mounting points. This guide covers prep, fitment, and final checks.
Why mud flaps matter for the Highland
The Model 3 Highland's lower body panels are more exposed to road spray than previous versions, especially in wet or snowy conditions. Mud flaps act as a first line of defense, deflecting debris before it chips paint or corrodes metal.
Keep in mind that no mud flap is a full shield. They reduce but don't eliminate dirt buildup, and they can slightly affect aerodynamics at highway speeds. The trade-off is acceptable for most daily drivers.
Step-by-step installation
- Gather tools and prep the car: You'll need a clean cloth, isopropyl alcohol, and a trim removal tool (optional). Park on a flat surface and turn the steering wheel to access the front wheel wells easily. Check that the surface is clean and dry before starting.
- Clean the mounting area: Wipe the inside of the wheel well where the flap will sit to remove dirt and moisture. This ensures the clips and adhesive (if included) bond properly. A dirty surface can cause the flap to loosen over time.
- Align the flap with existing holes: Hold the flap against the wheel well and align its holes with the factory mounting points. Do not force it; if holes don't match, re-check orientation. Forcing misaligned holes can strip the plastic.
- Secure the flap with clips or screws: Insert the provided clips or screws and tighten by hand until snug. Avoid over-tightening, which can crack the ABS plastic. Hand-tighten only; use a tool only if the clip has a hex head.
- Repeat for all four wheels: Repeat the process for the other front and rear wheels. For rear wheels, turn the steering wheel to full lock in the opposite direction to access the area. Do a final visual check that all flaps sit flush and don't rub against tires.
Product facts
- Evannex Mini Mud Flaps for Tesla Model 3 Highland: Shorter bottom edge allows for clearance over bumpy roads and steep entrances without damaging the flap. This design is ideal if you frequently encounter speed bumps or steep driveways, as it reduces the risk of scraping.
Evannex Mini Mud Flaps for Tesla Model 3 Highland - Mud Flaps For Tesla Model 3 Highland: OE replacement upgrade with easy installation and no drilling required. It matches factory mounting points, so you get a clean fit without modifying your vehicle.
Mud Flaps For Tesla Model 3 Highland
