Luxe Floor Mats for Tesla Model 3: Fit and Care Guide

Quick Answer

Luxe Floor Mats for Tesla Model 3 fit all floor surfaces and require gentle cleaning with a vacuum and mild cleaner to maintain their thick, stain-resistant pile.

How to Install and Care for Luxe Floor Mats

1. Installation: Position and Secure: Remove any existing mats. Place the Luxe floor mat in the driver's footwell, aligning it with the factory retention hooks. Press down firmly around the hooks to lock the mat in place. Repeat for the passenger and rear mats. Common mistake: Forgetting to align the mat under the hooks, which can cause the mat to shift while driving. Check that each mat does not move when you press the brake pedal or slide your foot across it.
2. Daily Cleaning: Vacuuming: Use a handheld vacuum or a brush attachment on a full-size vacuum to remove loose dirt and debris. Work in the direction of the pile to avoid matting. Pay extra attention to the driver's footwell, where the most dirt accumulates. Common mistake: Using a beater bar or high-power setting that can damage the deep pile fibers. Vacuum at least once a week to prevent dirt from embedding in the carpet.
3. Spot Cleaning: Treating Stains: Blot fresh spills immediately with a clean, dry cloth. Mix a small amount of mild carpet cleaner with water (follow the cleaner's instructions). Apply the solution to a microfiber cloth, not directly to the mat, and gently dab the stain. Rinse by dabbing with a cloth dampened with plain water. Common mistake: Scrubbing vigorously, which can spread the stain and fray the fibers. Always blot, never scrub, and test the cleaner on an inconspicuous area first.
4. Deep Cleaning: Gentle Wash: If the mats need a full refresh, shake them out outdoors to remove loose dirt. Use a garden hose with a gentle spray to wet the mat. Apply a carpet shampoo designed for automotive use and work it into the fibers with a soft brush. Rinse thoroughly until the water runs clear. Common mistake: Using hot water or a pressure washer, which can shrink or distort the mat backing. Air dry the mats completely before reinstalling them to prevent mildew.
5. Drying and Reinstalling: After washing, hang the mats or lay them flat in a well-ventilated area away from direct sunlight. Do not use a dryer or heater. Once fully dry (usually 24 hours), reinstall them in the vehicle, ensuring they are properly aligned with the retention hooks. Common mistake: Reinstalling damp mats, which can lead to odors or mold growth under the carpet. If the mats feel damp after 24 hours, allow more drying time before putting them back in the car.

Product Facts

• Luxe Floor Mats for Tesla Model 3: Premium grade carpet is the thickest, heaviest, deepest pile manufactured with yarn specially Scotchgard treated for stain and soil resistance. This means the mats resist stains from spills and daily grime, but you should still clean them promptly to maintain the deep pile's appearance.