How to Install Silicone Wiper Blades on Tesla Model 3

Quick Answer

Replacing your Tesla Model 3 wiper blades with silicone ones is a straightforward DIY task that takes about 10 minutes. The SlimFit Silicone Wiper Blades offer better performance and a water repellent coating.

Step-by-Step Installation

1. 1. Lift the Wiper Arm: Raise the wiper arm away from the windshield until it locks in the upright position. This gives you access to the blade attachment. Do not let the arm snap back onto the glass—it can crack the windshield.
2. 2. Remove the Old Blade: Press the tab on the wiper blade connector and slide the blade downward off the arm. The factory blade should release easily. If the tab is stiff, use a flathead screwdriver to gently pry it—avoid bending the arm.
3. 3. Attach the SlimFit Blade: Align the adapter on the new silicone blade with the wiper arm hook. Push upward until you hear a click, confirming it is locked in place. Ensure the blade is fully seated—a loose connection can cause skipping during use.
4. 4. Lower and Test: Carefully lower the wiper arm back onto the windshield. Turn on the wipers briefly to check for even contact and smooth operation. If the blade chatters, clean the windshield with glass cleaner to remove any residue from the old blade.

Product Fact

• SlimFit Silicone Wiper Blades for Tesla Model 3: Made of 100% silicone, the wipers are covered with water repellent coating, ensuring protection of the wipers. This coating helps reduce streaking and improves visibility in wet conditions without needing separate treatments.